Quote:
Originally Posted by TAG UR IT
You got a lot of reading to do. I can't remember off hand, but it's been mentioned a few times.
|
I just finished my dash ABL using EL wire. Tag is right. I read all 17 pages of this thread 4 times before I started. I taped into the purple wire and used a nearby ground wire. Polishing is key. I used Meguiar's plastic polish with my drill. It saves a LOT of sanding!
I think, IMO, the right side is perfect but the left side drooped a little when I glued the plastic tube so it has a dim spot in the middle. Easy fix.
I know, I know.
Pictures.
Soon. Thanks everyone.