Quote:
Originally Posted by wrbear
I've attached a picture with the 2 rubber torque screws (in yellow circles):
Hand turn these. Hope this helps! oh and the other circled items were to remove the top plate only. |
Hmm...There are 2 other screws on the top. Not sure if these are the torque screws mentioned above. You can see 2 other screws on the top next to the locking latch. They seem to drop down to a tab on the body. These look adjustable also. My experience was that the 2 rubber stops did keep the hood from dropping flush on my re-install. I did not adjust the other 2...hope the pic helps for future cussing and discussing.