What is the weight differance between the Brembos on the SS and standard brakes on the base V8? dropping down a rim size would save weight as well.
wow 1800 for a K member
Quote:
Originally Posted by Dragoneye
The stock exhaust manifolds and mufflers are worth about 50lbs if you replace them all.
You could switch from the stock solid sway bars to hollow pieces for about 15-20lbs
The rotors could be replaced with two-piece units, and the wheels could be swapped out, too and possibly save about 10-15lbs per corner.
If you want to get down to the nitty-gritty, you could remove the floor pan and mat of the trunk, the engine cover, and the owner's manual (  ).
EDIT: But they say 10hp is worth 100lbs in the quarter mile. So I would recommend you save a few thousand dollars and install drop springs, hollow sways, a cat-back exhaust, and a good CAI.
That'll loose 50-75lbs and gain maybe 15-20hp. 
|
Dosent seem worth it does it. Better off just making more power... Bummer
I was trying to keep the motor as stock as possable, I was going to get a CAI and mufflers and keep it that way.
__________________
2017 Shelby GT350, Ruby Red, H6088
2017 Camaro SS, Hyper Blue Metallic
2016 Taurus SHO, Tuxedo Black
2005 Mustang GT, Mineral Grey - Sold