View Single Post
Old 12-31-2010, 07:49 PM   #8
Sack Rat 2SS

 
Sack Rat 2SS's Avatar
 
Drives: Silver SS/RS, Man 6
Join Date: Apr 2009
Location: DFW area, Texas
Posts: 884
Quote:
Originally Posted by hp junkie View Post
when I did mine I took off the fuel and evap line then the coil packs and there was plenty of room. it was actually harder to change the springs on the drivers side.
The two things that make passenger side a little tougher is the hood support rod is where you need to be and the antilock mount HVAC box etc takes up space. I agree with post above that this is a good time to replace the two heater hoses as you have the coil pack off. Still a little tough as factory cements the hoses but still very doable and has been sone many, many times. In fact it was my first Camaro tweek. Also, you could flip the fuel rail too. Good luck
__________________
Silver 2SS/RS Man/6
CTS-V front 6-Piston Calipers,
GM 3.91 Rear Gears
Sack Rat 2SS is offline   Reply With Quote