Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - GHL PROBLEM !! How did you align your aftermartket exhaust tips?

BlownSS · 01-18-2011, 08:35 PM

i would take it to get fixxed but by the way that they are held on in the back, there is no movement if you line them up with the hangers on the car in relation to the hangers on the mufflers that GHL sent me. It can only sit one way......I tried to reverse the rubbr hangers and switch directions but no dice. I think that at least one of the muffler/exhaust pipes is out of whack

01-18-2011, 08:35 PM	#3
BlownSS Drives: 2010 Camaro SS/RS Join Date: Oct 2009 Location: Lincoln Nebraska Posts: 1,754	i would take it to get fixxed but by the way that they are held on in the back, there is no movement if you line them up with the hangers on the car in relation to the hangers on the mufflers that GHL sent me. It can only sit one way......I tried to reverse the rubbr hangers and switch directions but no dice. I think that at least one of the muffler/exhaust pipes is out of whack __________________ 2010 IOM SS/RS LS3, Hennessey HPE550 Polished Magnuson TVS2300 Supercharger. 3.4 Pulley. Kooks long tube headers / high flow cats. GHL Full exhaust. ZL1 Fuel Pump/ADM FPCM. MSW Bap. JRE ZL1 Race cam with new springs/pushrods/Trunion Upgrade. FIC 850cc injectors. ZR1 Map sensor. CAI Induction. JRE Tune.