Thread
:
SPR 2011 Vortech V3 build
View Single Post
01-21-2011, 09:56 PM
#
1
g4dadon
Straight Performance Racn
Drives: Anything over 600rwhp
Join Date: May 2010
Location: Baton Rouge, Louisiana
Posts: 211
SPR 2011 Vortech V3 build
This is the SPR 2011 LS3 build from the bolt on section,well its now Vortech Equipped!!! Just a recap of the mods done to this car JRE smooth idle cam, Dynatech 1 7/8 headers with cats (which is now gutted) 2 1/2 borla touring exhaust, Vortech V3, FAST 65lb injectors and Lonnies Performance drop in dual pumps. We have the rx catch can on order along with another mod which im sure ted will elaborate on at a later date. All of the work performed on this build is by Straight Performance Racing and the tuning duties is handled by Ted Jannetty. The numbers you see is only at 8.5psi with only 10degrees of timing thanks to some bad gas and the knock sensor catching it thus the 10degrees. We will be redynoing it next week with better pump gas along with the catch can and the afore mentioned ted mod, the 8.5 psi will remain the same as its super safe at this boost level. Hope you enjoy!!!
Before.
What Intercooler
Vortech Equipped
The NUMBERS!!!
g4dadon
View Public Profile
Find More Posts by g4dadon