View Single Post
Old 01-24-2011, 10:17 AM   #6
BMR guy
 
BMR guy's Avatar
 
Drives: 2010 1SS
Join Date: Jan 2010
Location: Tampa, FL
Posts: 1,002
We have been building both Camaro and Mustang suspensions for the last 13 years which gives us tons of test data from both vehicles. Over the years they have both packed on the weight however the Mustang tends to "wear" it better. This is mainly due to a better matched spring and sway bar combo, less suspension flex (can you say Camaro cradle bushings), less overall weight and lighter un-sprung suspension/wheel weight.

If you were to compare the Zeta Camaro to the 2010 or older S197 Mustangs, the Chevy would walk all over the Ford. The 2011 Mustang however has much improved spring and sway bars rates, way more usable power and with the Brembo option, better matched brakes for the weight of the vehicle.

That being said it's not too difficult to get your Camaro to out-perform the 2011 Mustang. A set of rear cradle bushing inserts to stabilize the rear suspension cradle, a set of lowering springs to increase the spring rate, and a set of adjustable swaybars to reduce the body roll. These 3 mods alone will edge you past the Mustang, despite the weight and braking disadvantages. The best thing about these mods is that the car will "feel" smaller and lighter in the process making the car even more enjoyable to drive...
BMR guy is offline   Reply With Quote