Quote:
Originally Posted by Darth Martel
***facepalm***
I will not be purchasing this if you sell it the way it was originally designed. It looks good but, not covering the factory holes is a big NEGATIVE. Not when I can go out and get a different spoiler (for cheaper) that does cover the holes. My original thought was that you'd add a couple pillars (standoffs) so you'd have 4 of them instead of 2. I assume that the pillars are made individually and added to the spoiler section. Just put on 4 instead of 2. Done deal. Or, the other option would be to make the spoiler with a base that mounts to the deck lid. The cheaper of the two options would be to add the pillars, I'd guess. I look at it this way, if you have to charge a little more for materials then so be it. It's going to cost another $100-$250 to get the holes PROPERLY filled and painted so, if it costs an extra $50-$100 in materials to have the spoiler cover the holes then, ok I could probably live with that.
Otherwise, I'm OUT, if you aren't going to be covering the holes.
|
Well, the holes are soo close to the edge of the trunk that it would be really hard to keep the design and push it back. with 4-6 peds. I am thinking about making a skin to go over it.