Quote:
Originally Posted by crewxp
Hi, I just wanted to post a quick question before I head to bed. Getting ready to order all my AAC lighting accessories tomorrow morning and was curious as to how I would wire it.
Couple of questions for ambient owners
1.) If the Footwell and Cupholder lighting were wired to the ambient lighting in the car (2LT), they're controlled via the car's dimmer, right? Yes that is right
2.) In the car, what does the dimmer control that's stock exactly? The dome lights and door ambient lighting brightness? That's it? no also the gauges, But not the dome light's
3.) Are there any known tutorials out how to wire something to the ambient lighting?
|
get the shop manuals.
Quote:
Originally Posted by camaro4mybday
if you have a 2lt pop off the center gauge cluster pull the plug and use a test light to find your wires i believe its the yellow and black that you use it works very very well doing that
|
There are 3 blacks under there you want the one on the connector that by it self on the top row( her is why that is the same ground that GM use's for the ABL) , And the yellow.