Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

WorldClassRS · 02-16-2011, 10:43 PM

xTooltipElement
Service Information Related Documents Global Labor Time Guide: Headlining Trim Panel Area Waterleak Repair Global Labor Time Guide: Headlining Trim Panel Replacement
2010 Chevrolet Camaro | Camaro VIN F Service Manual | Body Hardware and Trim | Floor Coverings and Headlinings | Repair Instructions | Document ID: 2206856
--------------------------------------------------------------------------------

Headlining Trim Panel Replacement

Callout
Component Name

Warning: Do not attempt to repair or alter the head impact energy-absorbing material glued to the headliner or to the garnish trims. If the material is damaged, replace the headliner and/or the garnish trim. Failure to do so could result in personal injury.

Caution: Use care when working around the head curtain inflator module. Sharp tools may puncture the curtain airbag. If the head curtain inflator module is damaged in any way, it must be replaced.

Caution: If a vehicle is equipped with a head curtain inflator module ensure that the inflator module and tether are undamaged. If tether or curtain airbag are damaged in any way, they must be replaced.

Preliminary Procedures
Disable the SIR system. Refer to SIR Disabling and Enabling.
Remove the windshield side garnish moldings. Refer to Windshield Side Garnish Molding Replacement.
Remove the sunshade assemblies. Refer to Sunshade Replacement.
Remove the sunshade support. Refer to Sunshade Support Replacement.
Remove the overhead console assembly. Refer to Roof Console Replacement.
Remove the coat hooks. Refer to Coat Hook Replacement.
Remove the rear quarter trim panel. Refer to Quarter Upper Trim Panel Replacement.
Remove the front seat. Refer to Driver or Passenger Seat Replacement
Move the driver seat fully forward and recline.

1
Headliner Trim Panel Retainer

2
Headliner Trim Panel Assembly

Procedure
Prior to removal, note routing of wire harness to aid in assembly and to ensure proper installation.
Disconnect the electrical connectors.
Removal and installation of the headliner must be completed through the right front door opening with the aid of an assistant to prevent kinking or damage to the headliner.
Tip
When installing a new headliner, tape any unused connector to the headliner with a high adhesive tape.

© 2011 General Motors. All rights reserved.

02-16-2011, 10:43 PM	#5
WorldClassRS Drives: 2010 RJT LT/RS Join Date: Jun 2009 Location: Illinois Posts: 40	xTooltipElement Service Information Related Documents Global Labor Time Guide: Headlining Trim Panel Area Waterleak Repair Global Labor Time Guide: Headlining Trim Panel Replacement 2010 Chevrolet Camaro \| Camaro VIN F Service Manual \| Body Hardware and Trim \| Floor Coverings and Headlinings \| Repair Instructions \| Document ID: 2206856 -------------------------------------------------------------------------------- Headlining Trim Panel Replacement Callout Component Name Warning: Do not attempt to repair or alter the head impact energy-absorbing material glued to the headliner or to the garnish trims. If the material is damaged, replace the headliner and/or the garnish trim. Failure to do so could result in personal injury. Caution: Use care when working around the head curtain inflator module. Sharp tools may puncture the curtain airbag. If the head curtain inflator module is damaged in any way, it must be replaced. Caution: If a vehicle is equipped with a head curtain inflator module ensure that the inflator module and tether are undamaged. If tether or curtain airbag are damaged in any way, they must be replaced. Preliminary Procedures Disable the SIR system. Refer to SIR Disabling and Enabling. Remove the windshield side garnish moldings. Refer to Windshield Side Garnish Molding Replacement. Remove the sunshade assemblies. Refer to Sunshade Replacement. Remove the sunshade support. Refer to Sunshade Support Replacement. Remove the overhead console assembly. Refer to Roof Console Replacement. Remove the coat hooks. Refer to Coat Hook Replacement. Remove the rear quarter trim panel. Refer to Quarter Upper Trim Panel Replacement. Remove the front seat. Refer to Driver or Passenger Seat Replacement Move the driver seat fully forward and recline. 1 Headliner Trim Panel Retainer 2 Headliner Trim Panel Assembly Procedure Prior to removal, note routing of wire harness to aid in assembly and to ensure proper installation. Disconnect the electrical connectors. Removal and installation of the headliner must be completed through the right front door opening with the aid of an assistant to prevent kinking or damage to the headliner. Tip When installing a new headliner, tape any unused connector to the headliner with a high adhesive tape. © 2011 General Motors. All rights reserved.