Quote:
Originally Posted by GrtWht_2010_2SS_RS
Where did your line start? Did it begin at the edge of the bevel? Once you got it sanded down, did the light shine through nicely? Thanks for your response.
|
Best way to describe the sanding is to do just at the bevel, then look at it from the front at a light and see if you can see it. You also run your fingers back there and look from the front that is a good way to tell if your sanding is good.
You don't need to sand completely up from the bevel, in fact I think I have a couple MM of original paint at the very top. I usually sand about enough for the thickness of about half a pencil eraser.