I recently bought some Vossen 3-piece 20" wheels and I am trying to figure out how to best mount my OEM TPMS sensors. The wheel has 2 valve stem holes, and from what I've read, one is meant for the TPMS. However, neither hole seems to be particularly well suited for for the OEM Sensor. I took a bunch of pictures of all the possible sensor orientations that I could think of. I read about the iForged adapters that are available here:
http://www.iforged.com/store/index.p...be84358331f8e0
But the OEM sensor seems to be a lot larger than the ones in the pictures. See below. What do you think my best solution is. Does anybody have pics of the OEM TPMS sensor mounted in 3-piece wheels?
I have attached several pics, the first bunch are with the TPMS valve stem in one of the two holes already in the wheel. The last bunch is what it would look like if I used the "straight" TPMS adapter on the iForged site. I have rotated the TPMS in every position which the body is relatively flat on the wheel. (The last pic obviously won't work though because the valve stem will be in the way of the tire mounting surface.) Any ideas?
On a sort of related note, any idea why the valve stem hole towards the inside edge of the wheel is smaller than the one on the outside behind the center piece?