Quote:
Originally Posted by 2010 SS RS
I would like to put a big shout out for Brian@laramiegmautocenter and Garth for helping me out yesterday. We got my RPM rollbar installed for the most part. Without their help and advice I would have never figured it out as the instructions were absolutely no help whatsoever. Honestly, this project was absolute one of the toughest I have ever seen with the lower interior trim pieces having to be placed at the same time as the rollbar itself..to make matters worse my Fuel Pump controller module was in the way so it had to be wired half way thru the move. Garth is a measure genius and took plenty of pics. Not sure what will come of the rear seat. Does not look like it will be functional now but honestly I am just hopeful it will go back in place..Oh and then I found that I have to modify the rear wheel well liners so that is todays project. Anyway..thanks guys for the huge hand.
Larry
|
Pictures? I have no idea what you're talking about "Larry #33" (see RPM tag plate)  
Badass Larry!!!!! 
__________________
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC
NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc
Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit
LPE Brotherhood
.
|