|
gear
I ran 11.5 at no problem a week and a half ago. It may be a while before I go back to No Problem. I will probably run my 77 Cobra II mustang at State Capitol Sunday. It has a 347 stroker, solid roller lifter and weighs 2,900 lbs. Working on trying to get it to hook.
If you get a gear, I highly recommend Zimmer Gears for installation. They put in my 4:33 and have the experience, housing spreader, and depth gauges to do it right. I did not use the billet end caps, but my gears are making a little noise, so you might want to try them. The caps have to milled, so it adds a little to the cost. Zimmer was a whole lot cheaper than Jannetty Racing and two day turn around. I pulled the center section and dropped it off.
Good luck.
Mark
|