Quote:
Originally Posted by mpiper
Ok. I've got one clay bar left, so I can repeat the process and see if that fixes it. I went at about the same pressure you use taking off dried wax, so I'll put some elbow grease into it this time.
Yeah, I know not to repeat the delay again. The three day delay couldn't be helped because I drove to a location, parked the car, and didn't return for 60 hours. But I should have run it through a wash either before I parked, or at least before I drove the return trip. Once this is fixed, I'll be a lot more careful.
New question: my car is black, 3 months old. I bought it the second day it was off the truck. I'm now seeing small 1/4 inch spots that look like the clear coat is separating from the color coat. Not sure what this is, but thats what it looks like. I hoped the clay would take it off and that it was something exterior to the clear coast. Either I was too gentle, or it is the clear coat. Thoughts before I clay a second time?
|
Might need to have the paint checked out, sounds like you might have a bigger issue than bug guts.