I have bought a relay harness:
http://www.vvme.com/relay-harness-fo....html?cPath=20
When you say the relay needs to connect to the factory harness are you referring to the connection you made from the harness to the two pins on the ee connector? Or are you meaning there should be a relay connector that will plug into the factory harness plug? If so my relay only has the ballast connectionsx2, bulbx2, pos/neg battery, and trigger wire spade connectors.
only diff is it has 2 thin spade connectors for the trigger wires which I assume I will need to adapt to plug into that ee connector on the black/ white pins?
So do I need to connect the factory headlight plug on the pass side to the eagle eye connector? If I was not installing a hid kit and just using the halogen h9 bulbs I would be connecting both sides of factory plugs to the ee connector outside the housing correct?