Thanks very much... everyone... sorry we're weren't more interactive yesterday...
There is a lot that you need to have sorted out before you install these.. the inserts are pretty straight forward.. The rear sway isn't bad if your exhaust isn't in the way...
The front sway is a kick in the....
The rear coils are by far the most difficult, if you really know what you are doing and have all the right tools it is a one man job... The hardest part on the front coils are those damn clevis bolts on the knuckles...
Mossman was the key to us getting it done... he got the sway bars sorted out with a little very little help from me...
My assessment. you absolutely can do this yourself .... Must have tools... BIG breaker bar. wrenches up to about 24 mm. Six side deep well 1/2 sockets up to 24MM... small to medium vice....
and an impact wrench is a HUGE help... Almost a necessity.
If you've never done it before it's a two man job...
Damn the car sits down nice a low
Talk to you guys soon, trying to get it aligned today, we'll see.