Quote:
Originally Posted by GTAHVIT
OK
Fronts 64.8 CM
Rears 66.5 CM
And they are exactly the same on both sides.. I did not adjust the ride height at all.. They are set as they came from the factory.
Not that it affects ride height, but, we put the preload on the rears at 5mm and about 3 mm up front. I shot some video of how to set the preload on the rears, same process as the fronts.
Alignment,
Jerry Hamm here in Jax has a real good Corvette/Camaro Tech named Mike.
After I asked him to time the bushings he said no problem. In fact he said... I'm glad you asked me to do that it makes perfect sense....
I didn't ask him for any custom alignment, especially since I'm about to drive 4K miles here in a couple weeks... But they're gonna take care of me.
 |
OK translation
OE Front with 20" Wheels 694mm
OE Rear with 20" Wheels 700mm
OE Front with 20" Wheels 648mm / dropped 46mm about 2"
OE Rear with 20" Wheels 665mm / dropped 35mm about 1 1/2 inches
Tell you alignment professional Mike that you would like your rear to have minimal negative camber. Less is better. Up front with your Supercars and radius bush inserts you can run a bit negative -.75 to -1 with minimal toe and get excellent tire wear all around with good turn in and cornering.