Quote:
Originally Posted by 67motorcat
Just re-installed my Valve with some RTV black on the threads.It made a nice seal and smashed out at the bottom with the Valve facing toward the engine.
I did install all the hoses with the silicone wet so everthing will cure as set with no chance of breaking the seal or rotating the valve while pushing the hoses on.
I going to let it cure overnight and see what happens.There is no way it could be leaking now.
|
Good job. Can't wait to hear how it turns out.
I took my drain off, left the bracket attached, and thumped the can. It does resonate afterwards, but doesn't sound like what I was hearing. I slid a long phillpis screw driver into the bottom of the can to check for anything odd about the tube. It seemed fine, but I can see where it could vibrate. However with it oil coated, I'm unsure it could make enough sound to resonate though the can and the hoses. Also thought I'd mention my hissing wasn't like and air leak hiss it was something else for sure.
It is a mystery that someone will easily solve I'm sure.