|
No it is not the same perse. The harness plugs in between the stock amp and stock wiring harness basically creating a bridge. Out of the bridge you have five (5) connections, I am assuming you are only talking about the X3 connector and not the amp replacement kit.
The five (5) connections you have are:
4x rca outs used to send signal to your after market amplifier in either two or four channel config
1 remote turn on lead that you wire to your after market amplifiers remote signal terminal.
I am not familiar with a bazooka amp but I think you will be fine. If you have any questions email or call Steve directly. He is very knowledgeable and easy to work with.
Cheers
K
|