Quote:
Originally Posted by Smoky10
I'm looking into buying the 1 piece driveshaft for my 2010 SS from the Drive shaft shop. Are there any downsides to installing a 1 piece driveshaft on our cars at all?
|
Mine is just as smooth as stock. One area to look out for is the area above the pinion. I have stock diff bushings and the drive shaft bolts hit when under load. I would grind the 1/8 in lip off the rear cradle above the pinion. Easy to do after the stock shaft is removed. When the rear adapter is installed with the bolts and nuts you will see just how close it is.