Quote:
Originally Posted by Orange2SSRS
I am looking at 00:24 to 00:35 in the video. It could be that the lighting changes and it appears as movement. Even if it did not move, I think the question is still valid. Will vibration or repeated loading and unloading on the aluminum cause wear on the bushings that will require them to need replacing in the future?
|
That's the lighting in the video shifting around, the mounts allow no movement and require a slight press for a solid connection to the subframe. They are manufactured from 6061-T6 aluminum then anodized orange... as there isn't any movement in the rear subframe there wont be any degradation of performance over time. 6061 aluminum is way more than sufficient to last the lifetime of the vehicle!
--
Jarrett