Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

IROCanSS · 05-31-2011, 07:01 PM

I just put a set of DMH cutout on this past weekend.

Super easy install IF you have access to a devise to cut the exhaust and a welder. Took me about 4 hours working slowly. I put the switch in the power port next to the traction control button. very stealth. Its too loud to drive open but it is fun to pop them open at idle!

05-31-2011, 07:01 PM	#9
IROCanSS Account Suspended Drives: 89 IROC 350 Join Date: Mar 2009 Location: Back roads, southern Ohio Posts: 12,504 View My Garage	I just put a set of DMH cutout on this past weekend. Super easy install IF you have access to a devise to cut the exhaust and a welder. Took me about 4 hours working slowly. I put the switch in the power port next to the traction control button. very stealth. Its too loud to drive open but it is fun to pop them open at idle!