Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - Rear end "popping" noise, need help and opinions

Fiftydriver · 06-06-2011, 09:21 AM

Would a set of upgraded axels solve this popping? I have been considering upgrading them anyway but if this would likely solve the problem, I would certainly replace them.

I have driven some cars with spools, not alot but a few and this rear end in my camaro is every bit as tight as those, at least it seems it from driving around town.

Thanks for your time.

06-06-2011, 09:21 AM	#5
Fiftydriver Drives: 2010 Camaro 2SSRS RJT L99 Join Date: Jun 2010 Location: Fort Shaw, Montana Posts: 1,242	Would a set of upgraded axels solve this popping? I have been considering upgrading them anyway but if this would likely solve the problem, I would certainly replace them. I have driven some cars with spools, not alot but a few and this rear end in my camaro is every bit as tight as those, at least it seems it from driving around town. Thanks for your time. __________________ Fiftydriver 2010 SSRS, RJTC, L99, Maggie 2300 SC, 3.4" pulley, Roto-Fab CAI, Dynatech Supermaxx LT headers, Dynatech High Flow cats, Corsa Cat back exhaust, Dual Elite Engineering catch can, MSD wires and Jannetty custom tune, JRE custom diff w/ posi mod, 3.91 LPE gears, Pfaht trailing arms, Pfaht trailing arm and Diff bushings, drop springs and sport sway bars front and back, Fesler dual guage pillar pod w/ AM Cobalt Boost and A/F guages. More to come!!