[rolnslo]

For those of you that prefer to learn by watching rather than reading, here are some videos to help you through the install process. This is also for those that get stuck while following the printed instructions. The clips are pretty much in real time (with a few edits, as needed). Your install time might be shorter because you aren't explaining things as you go.

Hope these help out a bit....

[Tip: Bump the video quality down to 360p to speed up the download time for each part.]


UPDATES:
1. When cutting the radiator brackets, also remove the positioning tab on each bracket. The positioning tab is located just below the bolt hole and goes into an extra hole on the core support. This tab needs to be removed or it will interfere with the installation of the air scoop.

2. The air scoop included in the kit does not include the extra flap shown on the air scoop in the video. The version of the air scoop in the kit is correct and the extra flap was determined to not be necessary and was eliminated as part of the kit. The version of the air scoop shown in the video was a pre-production part and not the same as what was included in the final product.


Part 1 - Removing the stock intake (11:15 min):




Part 2 - Installing the air scoop (9:34 min):




Part 3 - Installing the Vararam intake (7:46 min):




Part 4 - Finishing the install (9:42 min):