Well I do want performance so I spent about an hour making the Vararam as it should have been received. One thing I didn't know was the MAF sensor would not even fit into the hole so that had to be trimmed, not to mention the big blob of glue that was on one of the edges if not fixed would have surely caused a leak.
The we come down to fit........The unit I have did not fit worth shit. The rubber that was supposed to secure the radiator barely touched the radiator and all of the downward pressure was on the edge of the aluminum condensor...........very poor in my opinion. I spent an hour trying to position the Vararam with no luck. Also the unit is slightly too wide as with one of the long screws in place the other side no matter what I did was cocked and would not screw in straight. At this point I gave up and everything went back into the box.
I recived a PM from Vararam and tried calling them a few times this afternoon and left a message but they never got back to me.
I guess I'll have to settle for the CAI. :(
More pictures.....
Almost all of the downward pressure was on the edge of the AC condensor
Right side = Straight bolt
Left side = Cocked
