Quote:
Originally Posted by IndeedSS1
Aren't there are two nuts on that stud? The fixed one and the one that holds down the ground terminal. Are you saying that both nuts need to be removed? Mine has two, at least that is how I remember it to be.
|
Along with the other installs I have done, mine only had one nut tightening the ground strap and a conduit support bracket to the block. if your setup has 2, I would suggest removing both and using the threaded shaft as your new "nut". As I stated before, put a spring washer between the two for a little added security. If yours did come with two nuts from the factory, post up a picture of the setup and I'll give you my 2cents on the install.