Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - Vmax CNC Throttle Body Updated Availability Inside

Mike Norris · 07-01-2011, 08:04 AM

Thank you KARBON

ramsman34,

The ripples or CNC marks do not go all the way around and the area where it is flat does not need or get and material removed via the CNC machine. That is an area that is hand finished.

On the bolt tightening, you will notice upon removal that they are not very tight. Torque spec is 89 in/lb or 10Nm which is quite light.

All in all a very simple install. I want to say someone did a step by step thread here somewhere.

Thanks

Mike Norris

07-01-2011, 08:04 AM	#56
Mike Norris Account Suspended Join Date: Jul 2009 Location: Indianapolis, IN Posts: 592	Thank you KARBON ramsman34, The ripples or CNC marks do not go all the way around and the area where it is flat does not need or get and material removed via the CNC machine. That is an area that is hand finished. On the bolt tightening, you will notice upon removal that they are not very tight. Torque spec is 89 in/lb or 10Nm which is quite light. All in all a very simple install. I want to say someone did a step by step thread here somewhere. Thanks Mike Norris