Quote:
Originally Posted by SSTG
Any daytime pics to see how you installed it?
|
I'm still getting some pictures taken, and I'm drunk right now, but here are some of the pictures of how it is installed.
These pictures were taken with my phone, so they suck.
How the wire looks like from the front of the car during the day. THe wire goes around all the way, then overlaps at the center. At the center, I take one end and pushed the wire through to the hole where the overhead console was. I used 8 feet of wire, provided plenty.
I used EZ-Mount EL wire, it provides a nice flat area to use tape on the sunroof rubbery part.
I hooked the wire up to the inverter, then stuffed it in the headliner. The inverter and wire have quick disconnects, so this part was easy.
I stripped part of the wire on the sunroof plug. The yellow is positive, black is ground. The inverter is polarity thingy, so you have to hook it up right or no worky.
Hopefully this will help out right now. It was a pretty simple install, as long as its not over 100 degrees outside. The longest part is installing the EL wire, especially around the corners. Any other picture types you want, ask, I'll take them with my digital camera, not my cell phone.