View Single Post
Old 08-01-2011, 06:36 PM   #1
gatorlover
 
gatorlover's Avatar
 
Drives: 2013 AGM 1SS/RS 1LE
Join Date: Jul 2010
Location: jacksonville
Posts: 248
Another cam question

Ok guys and gals, I just received a quote for a cam and wanted to get some opinions on the specs and such.

First let me level set by sharing the current mods on my car.
2010 2ss L99
K&N cold air intake
1 7/8 XSpower long tubes with cat delete connection pipes
Borla "s" type catback 2.5"
Jannetty Tune

As for the quote, this is what it includes:
3 bolt cam 225/230 .617 / .612 112 LSA
Remove and
Replace Camshaft, Requires
DOD/VVT Delete Lit and
Installation-Remove and Replace
Lifters,Valley Cover, Head Gaskets
Naturally Aspirated Electronic Fuel
Injection Tuning
GM VVT Delete kit-Engine Front
Cover Gasket

DOD Delete Kit-LS7 Lifters,
Valley Cover, Lifter Trays, Head Bolts
Camshaft, Pushrods, Double Valve
Springs, Valve Seats, Valve Seals,
Water Pump Gaskets, Timing Cover
Gasket, Front Cover Seal, ARP
Crank Bolt
GM MLS Cylinder Head Gasket
8 Quarts Oil, Oil Filter, Coolant

Curious if anyone else has a cam like this and what are your thoughts on how it will behave as a daily driver.


__________________
2013 Ashen Grey Metallic 1SS/1LE, NPP, Camera
(1 of 43 produced)

Last edited by gatorlover; 08-01-2011 at 06:48 PM.
gatorlover is offline   Reply With Quote