[skysharker1]

Ok.....received the second Metra kit from Crutchfield and this one was also missing the DDIN brackets....WTH is going on??!! I called Crutchfield and they were totally surprised that two kits in a row would be missing the brackets. SOoooooo, they are gonna send me a 3rd, but they are going to open and check it to ensure that the brackets are there. Wish me luck!!!

On the flipside, I went ahead and wired everything up and installed the AVH-P4300DVD and everything works fine. Climate control and all the functions are working perfect. Radio sits fine in the hole, but is still lacking the brackets for a secure fit. Once I get them, I will pull it back out and attach them, then completely done. I didn't cut anything in the radio well, but it was a bitch stuffing all them wires back there. AND, attaching the parking brake wire was a MFr!! There wasn't much room to play in near the E-brake.

Unfortunately, I was unable to utilize the existing XM tuner...so I have to install the Pioneer XM Tuner that I got. I already ran the wiring and just need to find a spot for the box and a location for the small antenna.

Kunihiro, it seems like the foam pad underneath the passenger footrest is glued to the rug. Did the installer separate it from the rug?? That is a nice spot for the box. Also, where did you mount the XM antenna?

When I am completely finished, I will take some pics and post.