Quote:
Originally Posted by axis
There has to be a gap around the intake tube. The tube moves back and forth with the engine. If it wasn't there, it would eat up the heatshield.
|
I just checked mine. there is ZERO gap around the tube. I even used a flashlight. You can't see any light around the seal. If the OP has a 1/4 inch gap its installed incorrectly, or he has a defective seal.
__________________
American Racing 1 7/8" Headers and Hi-Flow Cats, CAI cold air intake, Flowmaster AT exhaust, Vengeance Racing Stage 2 cam, VMax ported throttle body, TEA valve springs and titanium retainers, Trick Flow hardened pushrods, 180* T-stat, Comp Trunion kit, ZL1 Fuel Pump, ADM Fuel Pump Control Module, 20% window tint, Whipple Supercharger. Tuned by Mike Norris Motorsports. 656rwhp/584rwtq @10 PSI.
|