|
Toothbrush/T-B cleaner will work.
Small rags saturated w/cleaner work well.
Not knowing your capabilities, cleaning to be done holding throttle plate open.
Also, clean as much of the edge of the throttle blade as possible.
DO NOT spray cleaner into the throttle body. It will migrate into the throttle shaft area and dry out the shaft bearings. It also can migrate into the TPS sensor and short it out.
After cleaning, add a bottle of Chevron w/ Techron fuel injector cleaner to a full tank of fuel. Use the size for 20 gallon treatment.
Do not add fuel till your down at the last 1/4 full on the gauge.
Do the injector cleaner routine twice a year as a maintenence program.
Perform throttle body cleaning every year or 12k miles. It's easier to keep it clean than make it clean.
Good luck,
Rob
|