Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - Subthump 10" Drop-In Driver's Side Stealth Enclosure

sninja13 · 09-15-2011, 01:46 PM

Official Description
----------------------------------------------------------------------
Fits: 2010-2011 5th Gen Camaro Coupe
Construction: 5/8"/3/4" MDF
Approx. Empty Weight: 15 lbs
Installation Instructions Included
Fits 10" round or square subs
Mounting Depth: 7.5"
Max Magnet Diameter: 6.75"
Volume: .8 cu.ft
Finish: Charcoal Gray Trunkliner Carpet. Very nice OE Match
Terminal: Installed
Sealed Box
Subwoofer Sold Separately

For those who are not looking for that monster bass or don't feel like doing the above mentioned carpet modification, we have a solution for you. Our midsize drop in enclosure doesn't require any modifications whatsoever. Just slide into place and you are done. This is a great option for those who want a simple inexpensive sub to add bass to the stock system. This box is somewhat limited by the restrictive sidewall carpet, and therefore the overall volume and the subs that will fit are somewhat reduced compared to our larger box listed above. This box will only fit a 10" sub. Possibly a shallow 12, but no regular 12s over 5" deep. We make these boxes for both sides of the trunk, so if you're looking to run two 10s, then we have you covered. Please do not ask if your sub brand x model x will fit this box. We have no idea. Your sub must fit into the guidelines listed in the specifications. If your sub falls outside of those guidelines, then it simply will not fit and you should look into our larger box. We will not be responsible for subs that are too big to fit into the box.

Don't fall prey to those cheaper looking enclosures that are popping up all over the place now, trying to finally cash in on the Camaro craze. If you look at their specs, they don't have the internal volume or mounting depth that our box has to offer. Many of them are cheaply made in China. What good does a cheaper box do you if it doesn't have the features you need and the quality you deserve. Remember we were the first to come out with our line of boxes way back in the middle of 2010. And we continue to offer great designs and superb support. We are the leader in 2010 & Up Camaro Enclosures and our enclosures are Proudly made right here in the Heartland of the USA.
----------------------------------------------------------------------

09-15-2011, 01:46 PM	#3
sninja13 Drives: 2010 2SS/RS, SIM B Rally, B Int Join Date: May 2010 Location: York Haven, PA (Near York & Harrisburg) Posts: 54	Official Description ---------------------------------------------------------------------- Fits: 2010-2011 5th Gen Camaro Coupe Construction: 5/8"/3/4" MDF Approx. Empty Weight: 15 lbs Installation Instructions Included Fits 10" round or square subs Mounting Depth: 7.5" Max Magnet Diameter: 6.75" Volume: .8 cu.ft Finish: Charcoal Gray Trunkliner Carpet. Very nice OE Match Terminal: Installed Sealed Box Subwoofer Sold Separately For those who are not looking for that monster bass or don't feel like doing the above mentioned carpet modification, we have a solution for you. Our midsize drop in enclosure doesn't require any modifications whatsoever. Just slide into place and you are done. This is a great option for those who want a simple inexpensive sub to add bass to the stock system. This box is somewhat limited by the restrictive sidewall carpet, and therefore the overall volume and the subs that will fit are somewhat reduced compared to our larger box listed above. This box will only fit a 10" sub. Possibly a shallow 12, but no regular 12s over 5" deep. We make these boxes for both sides of the trunk, so if you're looking to run two 10s, then we have you covered. Please do not ask if your sub brand x model x will fit this box. We have no idea. Your sub must fit into the guidelines listed in the specifications. If your sub falls outside of those guidelines, then it simply will not fit and you should look into our larger box. We will not be responsible for subs that are too big to fit into the box. Don't fall prey to those cheaper looking enclosures that are popping up all over the place now, trying to finally cash in on the Camaro craze. If you look at their specs, they don't have the internal volume or mounting depth that our box has to offer. Many of them are cheaply made in China. What good does a cheaper box do you if it doesn't have the features you need and the quality you deserve. Remember we were the first to come out with our line of boxes way back in the middle of 2010. And we continue to offer great designs and superb support. We are the leader in 2010 & Up Camaro Enclosures and our enclosures are Proudly made right here in the Heartland of the USA. ---------------------------------------------------------------------- __________________ Last edited by sninja13; 09-19-2011 at 03:42 PM.