Quote:
Originally Posted by RSokie
Ok Jeff you lost me also on that one also because this catch can the hoses are hooked to the passenger side PCV and the intake manifold.
Yes that is the one I was reading from on the back page.
|
On the rear stock fitting(with PVC tube pulled off) you will see a fitting with a tiny hole on top. That hole is to small to evacuate the crankcase vapors as is. It needs to either be drilled out to a larger hole( which is what I did), or it needs to be wrenched off and replaced with any 1/4 inch threaded elbow( as long as it isnt PVC), you can get at home depot(usually in the pnuematic tool isle) you want. But as is, that hole is too small.
__________________
K&N Cai, BSR Ported intake, MBRP catback, BBK long tubes, VMax throttle body, 3.73 SS gears, Zex nitrous 125hp shot, window switch, purge,remote bottle opener, bottle heater, Trifecta tune, Hurst short throw, RX catch can, Intake isolator, Ported Intake manifold
