|
you know the 35mm is way to big on a stock V6, especial if your not running some good quality struts and springs, and if you do run a 35mm front you need to upgrade the rear to a 22mm, to make things more even, Otherwise you can end up with too much oversteer. What you want is for the car to feel neutral through in the turns. This means you don't want the back end sliding out (oversteer) or the front end to push (understeer) but rather just grip.
The stock WS6/SS 32mm hollow front bar is the best bang for the buck and doesn't add much weight at all. you will Also need the corresponding 32mm bushings. I'd go ahead and upgrade to poly on the bushings and endlinks for the front and rear swaybars to freshen things. Also I would would not go better than a 19mm rear untill you can upgrade your stocks and springs.
|