Quote:
Originally Posted by scythezo6
That's your best bet! Take 2 buckets and your own soap and simple use the station for the water. I used to do this on base. I would pack up towels to wash, my absorber, my own car soap and a couple buckets. I would fill up my buckets in the restroom at the sink (save the coin water for the car). I'd drop in the minimum money to get the machine powered on, spray off the car with the hi press water, foam it down then rinse it (this knocks off most dirt and large particles). I would let the time tick down after that and just wash by hand with my own towels and soap. Add some coins. Spray off the the foaming brush and use the 'cleaned' foaming brush to clean the rims. Rinse the whole car down then dry it off. Go over the car with some detail spray and a clean micro fiber and your done.
|
That's what I do. But I wouldn't ever touch the foam brush for ANY part of the car. The wheels are painted and cleared too and can scratch just like the rest of the car. Use a wash mitt/pad for the car and then a small microfiber towel or boar's hair brush for the wheels.