Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - FIRST Camaro Wide Body in Texas in carbon fiber finish

Hennesseyrgv · 11-07-2011, 03:29 PM

Featured on Camaro5 HOMEPAGE

Here's the next wide body camaro in carbon fiber finish done in TEXAS.
We decided to go with nothing too over killed. we went with just the right amount on each side a 2 1/2 inch addition to each side. In total each quarter panel will measure 14 1/2. Also had an idea of making our own custom concept rear bumper where the exhust would come down the middle and just a lill bid above from your usual. This would mean mofication to the trunk floor and rear bumper Re-bar. For braking we went with an upgrade of brembo high performance sport brake system. last but not least we incorporated the shelby-cobra fuel door with high neck in stainless steel finish look. We still need alot of work to be done and time is limited at this point.
please enjoy the next pics.

OK, NOW THE REMOVAL OF THE CARBON FIBER

making sure the guys are working non stop

now lets go to the bumper

now lets go with tony

left side ready to be layed with carbon fiber

right side

modification on the trunk floor and Re-bar

New Brembo brakes

As requested, Here's some pics of the progress , we just finished the carbon fiber process

11-07-2011, 03:29 PM	#1
Hennesseyrgv CAMARO5LINE FOUNDER Drives: Hennessey HPE650 Join Date: Oct 2010 Location: LOS FRESNOS TX Posts: 955 View My Garage	FIRST Camaro Wide Body in Texas in carbon fiber finish Featured on Camaro5 HOMEPAGE Here's the next wide body camaro in carbon fiber finish done in TEXAS. We decided to go with nothing too over killed. we went with just the right amount on each side a 2 1/2 inch addition to each side. In total each quarter panel will measure 14 1/2. Also had an idea of making our own custom concept rear bumper where the exhust would come down the middle and just a lill bid above from your usual. This would mean mofication to the trunk floor and rear bumper Re-bar. For braking we went with an upgrade of brembo high performance sport brake system. last but not least we incorporated the shelby-cobra fuel door with high neck in stainless steel finish look. We still need alot of work to be done and time is limited at this point. please enjoy the next pics. OK, NOW THE REMOVAL OF THE CARBON FIBER making sure the guys are working non stop now lets go to the bumper now lets go with tony left side ready to be layed with carbon fiber right side modification on the trunk floor and Re-bar New Brembo brakes As requested, Here's some pics of the progress , we just finished the carbon fiber process Last edited by Hennesseyrgv; 12-16-2011 at 07:03 PM.