Quote:
Originally Posted by SSE 4 2SS
... It's the nature of the beast...
|
lol
Quote:
Originally Posted by Fire and Ice
600hp is possible just swap out the internals (forged pistons and rods etc.) and turn up the boost
|
Quote:
Originally Posted by Devryn17
"At least 600 hp" doesn't seem realistic at all.
|
600 can easily be attained without forging the bottom end. Much passed that and you are correct. But the right cam and exhaust will be key.
Quote:
Originally Posted by GretchenGotGrowl
Whiteside's turbos were built by RX Performance (SC2150), and is similar to my setup. 600 BHP probably won't be possible until we get a better high-pressure fuel pump. With the A6 you are going to have to invest some money in the differential (easiest to swap for a take off from a SS), and get a tranny cooler. Also consider a torque converter and some really good drag radials.
|
Quote:
Originally Posted by Fire and Ice
Didn't think about the fuel to air ratio so your saying that the stock fuel pump can't pump enough fuel at higher boost.
|
Depends on how much boost. But you at least want a boost-a-pump with a blower, and if you are seriously talking about 600+ rwhp then yes. A fuel pump upgrade is gonna be recommended.