View Single Post
Old 11-18-2011, 08:53 AM   #94

Blue70SS's Avatar
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,113
Originally Posted by 55Designs View Post
Hey Blue70SS thanks for posting these photos up. Do you know by chance if the LPE diff is the same size in terms of height vs the OEM? Do you know if the LPE diff has room above it if you were to raise it 1/2 to 3/4? I am thinking if the diff went up with solid offset bushings it may eliminate the exhaust clearance issues. Report back for us here if you can stick your hand on top of the diff while its mounted in the cradle.
Also, just noticed if the diff was raised you could also run into clearance problems with the inside CVs and the cradle.
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC
NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc
Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
Blue70SS is offline   Reply With Quote