View Single Post
Old 12-01-2011, 12:26 PM   #1
Agent Utah
Drives: '10 Camaro Victory Red
Join Date: Apr 2010
Location: Utah
Posts: 105
Arrow 900 HP Blown 429 Insanity! [COTW 4/30/12]

My '10 SS with just over 3,000 miles on it, was just not doing it for me power wise. I had a '68 in high school, and never really had the money to do what I wanted to with it.

I decided to do it right this time.

Here's the build sheet

(copy and pasted from the email the shop sent)

EnglandGreen Chaos F1R Package Stroker Package:

Use existing LS3 as core. Stroke motor to 429 cubic inch, 9.8:1 compression ratio
Callies Compstar crank
Callies Compstar rods
Diamond Pistons for forced induction applications
ACL/FM Rod, main, and cam bearings
Rear main seal
Rear cover gasket
Oil pan gasket
Valley cover gasket

Cylinder Heads:
Port existing cylinder heads
Upgrade valves
Head gaskets
ARP 12 pt. head studs
Morel lifters
Billet EnglandGreen Chaos 429ci F1R valve covers
Coil pack relocation and coil covers

Exhaust System:
Complete American Racing header system from engine to tips (with high flow cats), all stainless steel
Electric cutout system

Cam Package/Valvetrain:
High flow/High volume oil pump
160 degree thermostat
7.4 chromemoly hardened pushrods (upgrade to 3/8")
ATI SFI Balancer
Patriot Extreme dual valve springs with titanium retainers
Front cover gasket
Front cover seal
Oil pick up o-ring
Katech C5-R timing chain
Water pump gaskets EnglandGreen Chaos II camshaft ARP 12pt. Balancer bolt
ARP cam bolt kit
Cam sprocket
Yella Terra LS3 rocker arms

Induction System:
FAST 102 mm intake manifold for LS3 Powdercoat FAST to match customer car or customer's choice of color
FAST intake manifold port seals
V-Max ported LS3 (2010+) throttle body

Procharger System:
Procharger F1R Race Supercharger System Upgraded 1300HP intercooler
Polish supercharger head unit
Polish supercharger brackets

Fuel System:
Custom EnglandGreen 1300HP fuel system

McLeod RXT Twin Clutch GM Slave cylinder Remote bleeder
Pilot bearing
Flywheel bolts
DSS 2010 Camaro 1000HP Level 5 rear axles
RPM 3.91 ratio differential

Additional Items:
Dual nozzle Alky Control methanol kit
Tech AFZ Camaro heater hose relocation
Break in miles on new motor, clutch, gears before final tuning
EnglandGreen Custom Street and Dyno tuning

Pics so far...

In addition to the list above, have also build the tranny, ordered up new suspension gear (coil overs, etc) Brembo slotted brake setup, upgraded the driveline and bumped the cam.

Shooting for 850 at the wheels.

Last edited by Agent Utah; 02-01-2012 at 08:23 AM.
Agent Utah is offline   Reply With Quote