View Single Post
Old 01-02-2012, 11:51 AM   #346
YOUNGnRECKLESS
Building the Beast
 
YOUNGnRECKLESS's Avatar
 
Drives: 2010 VR LS3
Join Date: Oct 2010
Location: Queens, New York
Posts: 1,398
Quote:
Originally Posted by Mike1004 View Post
Ahhh so I'm scared to do this.. I tried it out on the pole of a broom stick.. I did two coats to it and it came out not so pretty - either I'm a terrible spray painter or retarded - because I gave it like 35 minutes to dry between the coats.. and I made them thick like everyone says to do. >_>

Now I'm nervous to do it to the car - did you guys do it inside a garage? Or can it be out in the open?

And are you sure it's easy to peel off?? Cause the broom stick was a pain in the ass to remove!
Trust me it's easy to peel off....takes some effort but doesnt mess anything up. Just spray light coats about 5-10 minutes apart and the last coat make a little heavier to make sure it covers everything.

I did 4 sets of wheels outdoors with no issues. Sometimes you'll see little imperfections toward the inner part of the wheel, but its plastidip, its not perfect But from 3 feet away at least they'll look awesome. Just go for it! hahaha
__________________
YOUNGnRECKLESS is offline   Reply With Quote