Suspension and UD Pulley installs by Blu808
From this point forward I was on site 'assisting' the installs. Truth be told the shop is a great bunch of guys who are happy to have you hang around and talk shop. I have been learning modifications and the more complex parts of how all the parts fit together, so they have been a great help in educating me in what I need to know.
Huge shout out to Marcus at Blu808 for putting up with me for the time it took to do these installs, and Josh for the sandwich
.
Pedders Subframe Bushing Inserts -
One thing to note is that the Pedders inserts do not fit into the 2012 vert without very minor modification. You just need to cut the ears off and then they fit perfectly.
Granatelli Adjustable Toe Rods - Check out the difference between these and stock!
Granatelli Trailing Arms vs Stock
LG 35mm Rear Sway Bar
Stock vs LG
Installed
Inserts, Trailing Arms, Toe Rods, and Rear Sway Installed
LG 35mm Front Sway w/ Endlinks
Stock vs LG, minor difference here...
The LG was so large Marcus had to raise the engine by an inch to snake it in!
Endlinks and Sway installed
ASP Underdrive Pulley (25%)
Just a wee bit smaller than stock, and built solid.
Installed sans belts