Quote:
Originally Posted by evolve
On the blower I have yes it is possible. On the stock eaton... no. If this were the case when I pullied mine on the eaton I would have gained ~100rwhp going from 10 to 15 psi.
|
Correct. just depends on the blower. I was just going of what Josh told me. I did not think it was quite that much. maybe 20 for the first psi and droping from there. after too much the blower becomes a heat pump and starts pulling more and more timing. which = less power..
I am fairly sure if i remember correctly. the 20 hp per 1 lb starts at 0 psi.. but once you get to like 9 psi to 12 psi the blower effecience drops drasticly. till you swap to say a screw style. Kenny bell, wipple and so on...
