[5THGENRS]

im about to put my shopping list together and had a few questions.
1. Can anyone confirm that the specs on the inverter (0-4) is based on the el wire using up the power or is it based upon the total length of the wire? i plan to have regular wire to extend especially the passender side and on each side i plan to extend so i can run thru existing holes.
2. What size wire are you guys using to extend before the el wire? 20-22 gauge? speaker wire?
3. So because i dont have the abl plug, ill have to plug into the purple wire, so power and ground feeding the inverter, hard wired in. Then on the other side, it looks like in the pictures that there is a plug (male or female?) then you plug in the splitter (2-5 way splitters). so on the multiple ends of the splitter, what type are they? male or female?
4. based upon what the answer to Number 1 is i plan to run the el wire then connect extra wire to that then run it thru existing hole and then wire up a connector, so do i need male or female connector to plug into what is the type connector on the splitter?
Hope this question are understandable, if not i can be even more clear, thanks. Just trying to get my shopping list together.
5. i still cant seem to understand what the 1 female connector from the shopping list is for? the males are suppose to be connected to the el wire, but can i run regular wire to the el wire and then wire in a connector and then plug it into the splitter? the passenger side, the wire will be so long and for routing thru the dash, i wont be able to connect the male to the el wire.