Quote:
Originally Posted by 67 GTO
I talked with the VR tech and he said a 3/4" gap would be fine but any closer may choke the air flow. BenningJ reported the same in another thread.
He also said shaving the horn at a very slight angle was ok if you wanted to dip the front back down.
|
Really? I might do that. So an angled horn is OK? That will give me a better gap in the front.
__________________
Pfadt Sway Bars - FE3 Suspension - Barton Shifter - IdealG's Clutch Master Cylinder - Trifecta - Vmax TB - Vararam Intake - MACE 25mm Insulator - Plenum Insulator - Ported/Gasket Matched Intake Manifold - Rx Catchcan - AAC DRL's - 4 Pack Aux Gauges - Steering Controls - AAC Afterburners - DIY Led Sidemarkers - ZL1 Front End
Next mod: Done!