View Single Post
Old 02-22-2012, 12:01 AM   #7
DashTronix
 
DashTronix's Avatar
 
Drives: DashTronix Radar Projector
Join Date: Sep 2010
Location: Display your V1 or 9500ci on your radio, DIC or HUD.
Posts: 35
Quote:
Originally Posted by kiteman View Post
this is no doubt very cool, but i do have some pretty intense questions:

1. has anyone/could anyone/do you think it is feasible to have the detector mounted somewhere at the front of the bumper and just use the HUD for readouts? IMO the only benefit of your device is for safety precautions so your radar detector is not visible to the naked eye when someone looks in your car and so you don't have to pack it up every time you park. what do you know/think about the feasibility of this option? i could see this being difficult with the radar detectors in question since both have rear radar protection that would likely require dismantling the detector itself to attached to both ends of the vehicle...perhaps there is another inconspicuous place to mount that is of less trouble?

2. hooking up something in the OBD...hrmm. i'm not sure if this assumption is accurate, but won't that void the warranty?
Thanks for the questions.

1: The Valentine 1 probably should not be mounted in the front of a car. It is not weather proof and would probably not last very long in the harsh outdoor environment.

The Escort 9500ci unit does mount in the bumpers with all components hidden from view. It is a custom installed unit that has radar sensors and laser sensors that are mounted in the front and rear of the car with the main unit hidden from sight.

2: Many devices are designed to be plugged in to the OBD-II port, such as diagnostic equipment, that can be purchased off-the-shelf from designers that are not associated with GM.

Team DashTronix

Last edited by DashTronix; 02-22-2012 at 12:55 AM.
DashTronix is offline   Reply With Quote