Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - Vmax Intake Manifold "BLACK ICE-olator" V6 LLT Base Test Results

Elykson · 02-29-2012, 04:57 PM

Just finished my install. I think if you seal the isolator to the IM, you will find it much easier to then put it back on the gaskets and then bolt on. I'm going to fire it up and go for a drive. Installing my tune after. Pics tonight on my build thread.

Edit: i had to cut some plastic retainer piece on the right side of the IM, that was holding a bundle of wires, to get the IM off.

02-29-2012, 04:57 PM	#243
Elykson Custom One Off Drives: 2010 Chicago Blackhawks Edition #1 Join Date: Oct 2010 Location: Madhouse on Madison Posts: 1,190	Just finished my install. I think if you seal the isolator to the IM, you will find it much easier to then put it back on the gaskets and then bolt on. I'm going to fire it up and go for a drive. Installing my tune after. Pics tonight on my build thread. Edit: i had to cut some plastic retainer piece on the right side of the IM, that was holding a bundle of wires, to get the IM off. __________________ Vararam Intake/SLP Loud Mouth II/BBK LT HFC/Magnaflow x-pipe/Pfadt Springs/Black Ice-olator/FE3 suspension/VMAX TB/RX catch can/Trifecta Tune http://www.camaro5.com/forums/showthread.php?t=129416 Last edited by Elykson; 02-29-2012 at 06:56 PM.