|
First, A-pillar trim is basically a snap in attachment. Likely needs to be popped back in place. Not a huge deal, should have been caught in prep. And the part may have been removed and reinstalled for some other reason and not re installed properly. I haven't seen anything like this in any Camaro so far and I've seen way more than you guys.
Second, gap in the rear seat is where the pull tab for the folding seat comes out. IT IS NOT POOR QUALITY IN THE STITCHING. Someone clearly pushed it back in. Look at any other photo on this site including mine and you'll see the pull tab coming out of the slot.
The "Orange peel" is on nearly every car to some degree. Lighting can and often does make it look worse than it is. This isn't a problem for me. But you'll have to judge for yourselves. Mass production does not allow for "perfect" paint jobs. The paint on the Camaro is equal to any other GM car or truck.
I can't speak to the other issues as they don't show up in photos.
Don't over react to this.
__________________
"Speed, it seems to me, provides the one genuinely modern pleasure." - Aldous Huxley
|