|
1. I used 2 LEDs, 1 on each side
2. Then you need to figure how and where you want to put the LEDs and conceal your wiring. My wires are hidden bu the cover conceals the LEDs.
3. The LEDs will have a red and black wire for ea LED. You can wire them together so there will be but only one power source and one single ground.
4. Traction control as stated in previous post is a great source for this mod.
5. I used like or similar LEDs under the dash for my footwell lighting, one per side and since I don't have a 2012 but a 2010, I tapped into my courtesy lights so they come on when the doors open and then fade to black as do the other lights.
I too have a 1LT/RS.
__________________
Never grow up, it's a trap!
|